Abocom 802.11b/g Portable Router WAP2102 Guide de l'utilisateur télécharger pdf (Page 23)

Client Mode

Client Mode Settings

Alias Name

Display the name of this device.

Band

You can choose one mode of the following you need.

~ 2.4GHz (B): 802.11b supported rate only.

~ 2.4GHz (G): 802.11g supported rate only.

~ 2.4GHz (B+G): 802.11b supported rate and 802.11g supported

rate. The default is 2.4GHz (B+G) mode.

SSID

The SSID differentiates one WLAN from another; therefore, all

access points and all devices attempting to connect to a specific

WLAN must use the same SSID. It is case-sensitive and must not

exceed 32 characters. A device will not be permitted to join the

BSS unless it can provide the unique SSID. A SSID is also

referred to as a network name because essentially it is a name that

identifies a wireless network.

Security

Click Setup button to enter the Wireless Security Setup page.

Authentication: Select an Authentication from the pull-down list

including Open system or Shared Key, Open System, Shared

Key, WPA-PSK and WPA2-PSK.

Encryption: Select either None or WEP.

Apply Changes: Press to save the new settings on the screen.

Reset: Press to discard the data you have entered since last time

you press Apply Changes.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

Pas de commentaire

Abocom 802.11b/g Portable Router WAP2102 Guide de l'utilisateur Page 23