CardBus 10/100 Ethernet PC Card Adapter Quick Installation Guide
- 9 - You may need to set it up again. For more information see the network troubleshutter in the windows Help”. If you don’t need to use the CardB
- 10 - 4. Insert driver diskette into the floopy disk. 5. Type A:\ .The driver will be installed and you may be asked for the original Windows 95 C
Windows 98 Installation 1. When the CardBus 10/100 Ethernet PC Card Adapter is well inserted into the PC Card slot of your system, the following fig
- 12 - 3. Insert the device driver disk into the floppy disk drive. Select Floppy disk drives and click Next. 4. Select The updated driver (Recomm
- 13 - CD-ROM, you’ll have to load it into the CD-ROM drive for the software installation need. 6. Wait for a while until the file copy process is
- 14 - 9. To verify if the device is well installed in your system and enabled, go to Start→ Settings→Control Panel → System → Device Manager. Mak
- 15 - Windows 2000 Installation 1. When the CardBus 10/100 Ethernet PC Card Adapter is well inserted into the PC Card slot of your system, the fol
- 16 - 3. Insert the device driver disk into the floppy disk drive. Select Floppy disk drives and click Next. 4. When the appropriate driver for
- 17 - 6. Click Finish. Then the software installation is successfully complete. 7. To verify if the device is well installed in your system and
- 18 - Windows NT 4.0 Installation Assumed that the Network Services already installed in the NT 4.0 system. 1. Insert the Cardbus 10/100M Fast Et
Hardware Installation This chapter describes how to install the CardBus 10/100M dual-speed PC Card in your notebook computer and connect it to networ
- 19 - (Or type the path name whereever you place the driver programs) 11. A dialog box will appear to adjust the driver's settings. The r
- 2 - Removing the CardBus Dual-Speed PC Card It’s quite different for various computer mechanical design. Please refer to the PC Card removal instr
- 3 - Connecting to the Network Connect unshielded twisted pair (UTP) cable to the RJ-45 connector of media coupler before loading any network drive
Software Installation Extensive software drivers have been developped for CardBus 10/100M PC Card including DOS-Mode, Microsoft Windows 3.x, Windows
- 5 - Windows 95 Installation Windows 95 released two major versions at the time when this manual is written. The first version ( refer to “Native Wi
- 6 - Version Information here! 4.00.950 or 4.00.950a is first released Windows 95 which don’t support CardBus. Refer t
- 7 - 1. Insert the Cardbus 10/100M Ethernet PC Card into the socket. 2. Click on the Start button. 3. Select Setting 4. Select Control Panel. And
- 8 - 12. Click OK. A dialog box will appear to adjust the driver's settings. The resources assignment to adapter should be uniqe in the syste
Commentaires sur ces manuels